INT10 IF Anemometer

Article-Nr.: 13 N 310 S101


INT10 IF Anemometer


Application Wind turbines
Measuring principle Contact-free magnetic scanning system
Measuring range 0-75m/s
Accuracy ±0.5m/s (VL≤35m/s);3% of measuring value (VL>35m/s)
Resolution <0.1m/s
Start-up speed <1.0m/s (ϑu=20C)
Connection DC 24V -25…+50%
Signal output DC 4-20mA Limited to 20.5mA
Signal availability Max. 2.5s (from voltage-free state)
Load resistance RLoad ≤600Ω
Connection type: Sensor 6-pin plug (M16)
Connection type: Recommended connecting cable 4x0.5mm² + 2x1.5mm²
Connection type Cable(12m)
Permissible ambient temperature T_A -40…+70°C
Permitted ambient temperature -40…+70C When heating is not connected: Snow and ice-free sensor is prerequisite.
Permissible relative humidity 0-100% RH
Stability For wind speed of 80m/s (max. 30min)
Protection class according to EN 60529 IP66
Heating: Type Autonomously controlled heating
Heating: Connection DC 24V ±10%120W SELV
Mounting Steel mast Max. ∅outer 50mmMin. ∅inner 37mm
Housing material Aluminium
Housing: Material Aluminium
Housing: Corrosion resistance Anodised
Cup anemometer: Material Aluminium
Cup anemometer: Corrosion resistance Powder coated
Check base EN 61000-6-2, EN 61000-6-3, EN 61010-1
Approval UL file no. E240032

Cookies facilitate the provision of services on this website. By using this website, you agree to the use of cookies. Privacy policy.